燃烧的岛群军史学习论坛 - Powered by Discuz! Board

标题: 求SSI 公司的GNB3 下载 [打印本页]

作者: zhangyuan555 时间: 2009-7-8 09:55 标题: 求SSI 公司的GNB3 下载

我很喜欢SSI 公司的作品，玩过GNB2 瓜达尔卡纳尔之后，更是对GNB 系列喜爱不已。于是搜遍网上寻找其系列作品，但是就是找不到描写太平洋41~44年战斗的GNB3 。本人由于热爱空母对决，所以很想要GNB3 ，如有朋友可以提供，感激不尽。

作者: martyc89 时间: 2009-7-8 22:14

本帖最后由 martyc89 于 2009-7-8 22:42 编辑

http://www.hotud.org/component/content/article/46-simulation/46/20167

慚愧啊~ 半年沒回來島群了

作者: zhangyuan555 时间: 2009-7-9 18:33

本帖最后由 zhangyuan555 于 2009-7-9 18:54 编辑

谢谢，但是DOSBOX 运行不能。输入gnb3后没反应。。。。。。。。。。。

作者: martyc89 时间: 2009-7-9 21:55

http://www.classic-pc-games.com/ ... aval_battles_3.html

這站好像要注冊才能取得.

作者: kevin_hx 时间: 2009-7-10 11:08

http://www.classic-pc-games.com/pc/simulations/great_naval_battles_3.html

這站好像要注冊才能取得.
martyc89 发表于 2009-7-9 21:55

这个注册过程真不是一般的麻烦。。。。花了我半个小时才搞定。。。。

作者: zhangyuan555 时间: 2009-7-10 11:46

牛牛下来后能装不？

作者: zhangyuan555 时间: 2009-7-12 11:07

我想问下，被遮住的英文是啥。。。。。。。。。。。怪不得说一定要英文注册。。。。。。。。。。由于是中文注册的，所以不知道w问题的答案了。。。。。。。。

作者: kevin_hx 时间: 2009-7-12 13:23

我是复制黏贴的，所以已经忘记了，不过提醒下，这个游戏要多土有多土，你要有心理准备，反正我是进去一次后，不知所云，出来后就搁置一边了。

作者: zhangyuan555 时间: 2009-7-13 09:11

牛牛看来是能运行喽？我想问下是用的dosbox 多少啊？我用073运行不能。

作者: kevin_hx 时间: 2009-7-13 12:48

嗯，我下的是GNB5，然后直接双击，就在XP下玩起来了

作者: martyc89 时间: 2009-7-14 02:16

我的 DOSBOX 0.70 可以玩 gnb3 啊, 會不會是設定的問題?

作者: zhangyuan555 时间: 2009-7-14 11:52

那我去下个DOSBOX 0。70来看看。89兄能否把dosbox的配置文件发下？

作者: zhangyuan555 时间: 2009-7-14 12:25

本帖最后由 zhangyuan555 于 2009-7-14 12:28 编辑

我想问下89兄，机器系统是啥啊？我073在sp3 上运行提2就不行，在sp2 上可以。还有89兄对dosbox 进行过配置吗？89兄的GNB3 是从这两个网站下的吗？这两个网站的文件都是一样的，是A00的解压文件。

作者: zhangyuan555 时间: 2009-7-14 21:07

看来是不行了。。。。。。。在台机和笔记本上都试了。。。。。。。。。。。看来我与此游戏无缘

作者: martyc89 时间: 2009-7-14 21:13

把電郵私訊過來吧, 我把東西寄過去你試試~

作者: zhangyuan555 时间: 2009-7-14 21:22

好的 zy411zy508@yahoo.cn

作者: zhangyuan555 时间: 2009-7-15 09:08

gnb3 终于能运行了，原来是dosbox 设定的问题。再次感谢89兄的帮助。我终于能体验这一经典了。

作者: futian 时间: 2009-7-18 16:58

给我也发一个,谢谢~~

kanxue@hotmail.com

作者: martyc89 时间: 2009-7-24 01:26

贴出 dosbox 设定档, 以後请各位朋友们自助

吾潜水去也~

[sdl]
# fullscreen -- Start dosbox directly in fullscreen.
# fulldouble -- Use double buffering in fullscreen.
# fullresolution -- What resolution to use for fullscreen: original or fixed size (e.g. 1024x768).
# windowresolution -- Scale the window to this size IF the output device supports hardware scaling.
# output -- What to use for output: surface,overlay,opengl,openglnb,ddraw.
# autolock -- Mouse will automatically lock, if you click on the screen.
# sensitiviy -- Mouse sensitivity.
# waitonerror -- Wait before closing the console if dosbox has an error.
# priority -- Priority levels for dosbox: lowest,lower,normal,higher,highest,pause (when not focussed).
#          Second entry behind the comma is for when dosbox is not focused/minimized.
# mapperfile -- File used to load/save the key/event mappings from.
# usescancodes -- Avoid usage of symkeys, might not work on all operating systems.
fullscreen=false
fulldouble=true
fullresolution=800x600
windowresolution=800x600
output=surface
autolock=true
sensitivity=100
waitonerror=true
priority=higher,normal
mapperfile=mapper.txt
usescancodes=true
[dosbox]
# language -- Select another language file.
# memsize -- Amount of memory dosbox has in megabytes.
# machine -- The type of machine tries to emulate:hercules,cga,tandy,pcjr,vga.
# captures -- Directory where things like wave,midi,screenshot get captured.
language=
machine=vga
captures=capture
memsize=16
[render]
# frameskip -- How many frames dosbox skips before drawing one.
# aspect -- Do aspect correction, if your output method doesn't support scaling this can slow things down!.
# scaler -- Scaler used to enlarge/enhance low resolution modes.
#          Supported are none,normal2x,normal3x,advmame2x,advmame3x,hq2x,hq3x,
#                      2xsai,super2xsai,supereagle,advinterp2x,advinterp3x,
#                      tv2x,tv3x,rgb2x,rgb3x,scan2x,scan3x.
frameskip=0
aspect=false
scaler=normal2x
[cpu]
# core -- CPU Core used in emulation: normal,simple,dynamic,auto.
#       auto switches from normal to dynamic if appropriate.
# cycles -- Amount of instructions dosbox tries to emulate each millisecond.
#          Setting this value too high results in sound dropouts and lags.
#          You can also let DOSBox guess the correct value by setting it to max.
#          The default setting (auto) switches to max if appropriate.
# cycleup -- Amount of cycles to increase/decrease with keycombo.
# cycledown Setting it lower than 100 will be a percentage.
core=auto
cycles=auto
cycleup=500
cycledown=20
[mixer]
# nosound -- Enable silent mode, sound is still emulated though.
# rate -- Mixer sample rate, setting any devices higher than this will
#       probably lower their sound quality.
# blocksize -- Mixer block size, larger blocks might help sound stuttering
#             but sound will also be more lagged.
# prebuffer -- How many milliseconds of data to keep on top of the blocksize.
nosound=false
rate=22050
blocksize=2048
prebuffer=10
[midi]
# mpu401    -- Type of MPU-401 to emulate: none, uart or intelligent.
# device    -- Device that will receive the MIDI data from MPU-401.
#             This can be default,alsa,oss,win32,coreaudio,none.
# config    -- Special configuration options for the device. In Windows put
#             the id of the device you want to use. See README for details.
mpu401=intelligent
device=default
config=
[sblaster]
# sbtype -- Type of sblaster to emulate:none,sb1,sb2,sbpro1,sbpro2,sb16.
# sbbase,irq,dma,hdma -- The IO/IRQ/DMA/High DMA address of the soundblaster.
# mixer -- Allow the soundblaster mixer to modify the dosbox mixer.
# oplmode -- Type of OPL emulation: auto,cms,opl2,dualopl2,opl3.
#          On auto the mode is determined by sblaster type.
#          All OPL modes are 'Adlib', except for CMS.
# oplrate -- Sample rate of OPL music emulation.
sbtype=sb16
sbbase=220
irq=7
dma=1
hdma=5
mixer=true
oplmode=auto
oplrate=22050
[gus]
# gus -- Enable the Gravis Ultrasound emulation.
# gusbase,irq1,irq2,dma1,dma2 -- The IO/IRQ/DMA addresses of the
#          Gravis Ultrasound. (Same IRQ's and DMA's are OK.)
# gusrate -- Sample rate of Ultrasound emulation.
# ultradir -- Path to Ultrasound directory.  In this directory
#          there should be a MIDI directory that contains
#          the patch files for GUS playback.  Patch sets used
#          with Timidity should work fine.
gus=true
gusrate=22050
gusbase=240
irq1=5
irq2=5
dma1=3
dma2=3
ultradir=C:\ULTRASND
[speaker]
# pcspeaker -- Enable PC-Speaker emulation.
# pcrate -- Sample rate of the PC-Speaker sound generation.
# tandy -- Enable Tandy Sound System emulation (off,on,auto).
#       For auto Tandysound emulation is present only if machine is set to tandy.
# tandyrate -- Sample rate of the Tandy 3-Voice generation.
# disney -- Enable Disney Sound Source emulation.
pcspeaker=true
pcrate=22050
tandy=auto
tandyrate=22050
disney=true
[joystick]
# joysticktype -- Type of joystick to emulate: auto (default), none,
#                2axis (supports two joysticks), 4axis,
#                fcs (Thrustmaster), ch (CH Flightstick).
#                none disables joystick emulation.
#                auto chooses emulation depending on real joystick(s).
# timed -- enable timed intervals for axis. (false is old style behaviour).
# autofire -- continuously fires as long as you keep the button pressed.
# swap34 -- swap the 3rd and the 4th axis. can be useful for certain joysticks.
# buttonwrap -- enable button wrapping at the number of emulated buttons.
joysticktype=none
timed=true
autofire=false
swap34=false
buttonwrap=true
[serial]
# serial1-4 -- set type of device connected to com port.
#             Can be disabled, dummy, modem, nullmodem, directserial.
#             Additional parameters must be in the same line in the form of
#             parameter:value. Parameter for all types is irq.
#             for directserial: realport (required), rxdelay (optional).
#             for modem: listenport (optional).
#             for nullmodem: server, rxdelay, txdelay, telnet, usedtr,
#                            transparent, port, inhsocket (all optional).
#             Example: serial1=modem listenport:5000
serial1=dummy
serial2=dummy
serial3=disabled
serial4=disabled
[dos]
# xms -- Enable XMS support.
# ems -- Enable EMS support.
# umb -- Enable UMB support.
# keyboardlayout -- Language code of the keyboard layout (or none).
xms=true
ems=true
umb=true
keyboardlayout=none
[ipx]
# ipx -- Enable ipx over UDP/IP emulation.
ipx=false
[autoexec]
# Lines in this section will be run at startup.
mount C C:\games\dosbox
mount D D:\ -t cdrom
C:
MKDIR C:\TEMP
SET TEMP=C:\TEMP

作者: zhangyuan555 时间: 2009-7-24 08:46

这个档最重要的就是最后的autoexec，否则GNB3 无法运行。

欢迎光临燃烧的岛群军史学习论坛 (http://bikooo.com/)